3 Steps
  • 1
  • 2
  • 3

Step 1:Prepare the crystal glue

Prepare the crystal glue _dearlivesPrepare the crystal glue _dearlivesPrepare the crystal glue _dearlives
Show all imgs!

Prepare the crystal glue with the electronic scale and the proposition is 1:3; and if you use the beaker , it should be 1:2.5. Mix them together and stir them for about 1-2 minutes. Then do not do anything until the bubble can not be seen (about 5 minutes).

Step 2:Place dried flowers as you like

Place dried flowers as you like_dearlives
Show all imgs!

You can place dried flowers anywhere as you like.

Step 3:Pour into the glue slowly

Pour into the glue slowly_dearlivesPour into the glue slowly_dearlivesPour into the glue slowly_dearlivesPour into the glue slowly_dearlivesPour into the glue slowly_dearlives
Show all imgs!

Pour into the glue slowly. And you can pour it in a series of layers and this is convenient to check the bubble. If you find any bubble, you should do the bubble pricking and you should repeat this step to check if there is any bubble in it.

You can continue the second glue filling (you can process this 1-2Hs later).

After 30HS later, you can take it out and polish it with emery paper. 

Materials:

  • Mould
  • Beaker
  • Dropper
  • Tweezers
  • Stirring Rod
  • Crystal Glue
  • Dried Flower
  • Emery Paper
  • Disposable Gloves
  • Electronic Scale

Tips:

Sorry, liked already!

COMMENT (0)

You must log in to post a comment