DIY Epoxy Resin Jewelry: Make your own favorite pendants

There are many individuals that are obsessed with resin jewelry. The reason is that you can create anything you like with any pattern. The biggest attraction is the cool resin pendants is that they have unique designs and shades that you might not be able to find in other types of jewelry. There are many individuals that want to get the resin jewelry but they cannot afford it. Here is how you can DIY Epoxy Resin Jewelry


Here is the list of items that you should have

• EasyCast

• Plastic mixing cups

• Mold-release spray

• Gloves

• Resin dye (optional)

• Wood stir sticks

• Paintbrush

• Images or items

• Mold

• Plastic sheet

• Ball chain necklace

share title_dearlives
Show all imgs!


1. Spray the mold release spray into the mold for preparation.

2.Take the cup and add an equal amount of clear resin for crafts and hardener

3. In order to blend the EasyCast properly, you will have to mix resin and hardener in a container and mix them for 2 minutes. After that add it to the EasyCast and mix for another 1 minute 

4.Pour the resin into the mold until it is half full

5. The item or image that you want in your cool resin pendants should be brushed with the resin after that put it face down in the mold containing the mixture of Clear resin for crafts and hardener.

6. Now you have to fill the rest of the mold properly. If you notice an air bubble in the resin you can use a hair dryer to remove it. However, do not use too much heat because it might melt the plastic.

7. If you want the colored resin you can add a few drops of dye while mixing the resin with the hardener. 

8. For the perfect pendants, you will have to leave the resin to set at the temperature of 70 to 85 degrees Fahrenheit. It is known as curing process and depending on the thickness and room temperature you can leave it for 72 hours for a hard cure and 24 hours for the soft cure. 

9. Once the item has been cured you can easily release it from the mold and set aside.

10. Now take your drill machine so you can make a hole in the resin. Select the sport for the hole that will not damage your image or item that you have embedded into the necklace.

11. Into the hole add the ball chain necklace and your cool resin pendants will be ready to wear. 

Using the same technique you can make different styles and types of DIY Epoxy Resin Jewelry. Make sure that you properly follow the instruction otherwise you will not be able to get the results that you want. Be careful while mixing the resin. You can try different mold for different designs and embed all the special items that you want. You can make a friendship pendant for your friend or the one for your boyfriend.

share title_dearlivesshare title_dearlivesshare title_dearlivesshare title_dearlives
Show all imgs!


Sorry, liked already!



Hot Blogs